Altimade Fulfilled by MacroFab
      Back to home
      1. MacroFab Platform Help
      2. Altimade Fulfilled by MacroFab

      Altimade Quoting Requirements

      MacroFab is excited to announce a direct integration with Altium Designer via the Altimade Designer extension. This article is intended to provide the design specifications supported by the integration.

      Please note any specifications in this document are in addition to the standalone MacroFab assembly capabilities.

      Fabrication

      Layers

      2, 4, 6, or 8 layer board (1.6mm)

      Stackups

      Standard “off the shelf”

      Vias

      Plated through hole view (no blind, buried, back dril, plugged, etc.)

      Surface Finish

      ENIG

      Trace Width

      5 mil (0.127mm)

      Drill Diameter

      10 mil (0.254mm)

      Maximum Board Size

      378mm x 378mm

      Outer/Inner

      1oz outer/1oz inner (35um) copper pours

      Via-In-Pad

      No

      Impedance Control

      No

      Rigid Flex

      No

      Number of Solder Mask Colors

      1

      Supported Solder Mask Colors

      Green, red, black, matte black, yellow, white, blue

      Supported Silkscreen Colors

      White, black, blue, yellow, red, green

      Assembly

      Minimum Component Size

      0402 imperial

      Minimum Component Pitch

      0.5mm

      Supported Component Placement 

      Double-sided

      Component Mount Type

      SMT and PTH only

      Supported SMT Specifications
      • BGA (>= 0.5mm pin pitch)
      • Leadless (e.g. QFN, QFP)
      • Leaded (e.g. TSSOP, etc.)
      • MELF

      Supported PTH Specifications

      All

      Supplier Type

      Turnkey preferred suppliers only 

      Service

      Minimum Order Quantity 

      1

      Maximum Order Quantity

      No limit

      “10-Day Guaranteed” Service Limits
      • SMT only: maximum of 4,000 placements across all units (placements X units)
      • SMT and PTH:  maximum of 4,000 placements across all units, with no more than 500 total PTH pins
      • PTH only: no more than 500 total PTH pins
      • Maximum of 50 units per order

      “Fast” Service Limits

      No limits, dynamic lead time and price

      “Standard” Service Limits

      No limits, dynamic lead time and price

      “Budget” Service Limits

      No limits, dynamic lead time and price